Large size heavy duty CNC Lathe Machine CK61140 CK61160
Application :
1. The control system uses a wide number of FANUC 0I-TF / GSK / SIEMENS.
2. 1.5 m, 3 m X / Z motor with funuc feed servo motor 20Nm; 5 m, 6 m X / Z motor 22 / 36Nm.
3. The main motor adopts Funuc/GSK/SIEMENS servo motor 22kw.
4. Shenyang vertical 4-station electric knife.
5. Electrical components Schneider.
6. X / Z to the use of domestic famous precision ball screw.
7. Spindle bearings using domestic famous products.
Other configuration:
1. Rail width of 755, load-bearing 6 tons, can change the weight of 8 tons.
2. Without semi-protection. Increase the cost of another.
3. Can be added chip machine. Increase the cost of another.
4. 5 meters above the lead with a screw support.
5. Can be changed to the overall bedside box structure.
6. The air box does not have air conditioning.
Product Specifications:
ITEM | UNIT | CK61140/10T | CK61160 |
CAPACITIES | |||
Swing over bed | mm | 1400 | 1600 |
Swing over carriage | mm | 1110 | 1210 |
Max.length of workpiece | mm | 3000 4000 5000 6000(8000/10000optional) | |
Max.turning length | mm | 2800 3800 4800 5800 | |
Pan of guideway | mm | 970 | |
Max weight of guidway | TON | 10T | |
SPINDLE | |||
Spindle nose | mm | A2-15 | |
Spindle bore | mm | 130 | |
Taper hole of spindle |
| 1:20/140 | |
Range of spindle speeds | r/min | 5~320 | |
No.of spindle speeds |
| STEPLESS | |
Chuck | mm | 4 jaw 1250mm | |
TURRET | |||
Turret working position |
| V4(V6/V8 Optional) | |
Section of tool shank | mm | 40X40 | |
TAILSTOCK | |||
Dia. of tailstock quill | mm | 220 | |
Travel of tailstock quill | mm | 300 | |
Taperhole of tailstock |
| Morse6 | |
OTHERS | |||
Workpiece accuracy |
| IT6~7 | |
Surface roughness | μm | Ra1.6 | |
Main power | kw | 30 | |
Lathe mass | kg | 13500 16500 18000 20000 | |
Length | mm | 6520 7520 8520 9520 | |
Width/ Height | mm | 2665/2680 | |
CNC System |
| FANUC0i-TD(Support customization) | |
Standard Accessories:
400mm 3-jaw Manual Chuck;
4 station turret;
Manual Tailstock;
Full-splash Guard
One piece machine bed
Wider layer board
3 gear speed change,stepless in gear
Optional Accessories:
Hydraulic Solid Chuck;
Hydraulic Hollow Chuck;
Hydraulic tailstock;
6/8/12-station turret;
Center Rest and follow rest;
4-Jaw chuck.
Living tools
CNC Controller system:
GSK; FANUC; Siemens; KND；SYNTEC
